Following the RG6 compression connector post is one about the tool professionals use to install it; known simply as a Compression Connector Tool (or DL-807, TTK-515), this product has numerous features that one will find highly desirable in coax installations: it is adaptable, has a simple mode of operation, and provides the best way (if not the only way) of fastening these connectors which have become the industry standard.

With this tool the several types of compression connector (F /BNC / RCA) will be able to be applied to an RG59 or RG6 cable. Not only are the different types served, but the various lengths that these connectors come in as well. The reason is that the Compression Connector Tool can adjust the length of the insertion point for the cable to accommodate larger connectors.

A tool used professionally and that is also able to be used in different situations may bring up the visualization of a complicated device; however, this is not the case as the operation of this compression tool couldn’t be simpler. In the previous post, which is accompanied by a video, the time from 1:53 through 2:20 will show just how easy the operation of this product is. Insert the cable, squeeze, and remove the cable, voila a professionally installed compression connector.

Installing an RF connector that utilizes a compression without a tool is not worth the hassle it would take, not to mention the seal may not be securely fastened therefore potentially ruining the cable, the connector or both. With this product one can achieve a seal that is both weather proof and signal proof, offering the individual a quality fitting. For this and the previously mentioned features, you should definitely take a look into a Compression Connector Tool for your installation.